|Service family: Work Package Management||NP : TBC|
|Branch: Exploration-Production||Ref : E&P|
|Metier: Project||Rev : 00|
|Direction: TUPNI / PREOWEI|
|SERVICE TITLE (HOLDER)|
|Title: Subsea Flowlines Jumpers Connectors Systems Engineer Incumbent: TBA Signature : Entity: TUPNI / PREOWEI Employee Id N°:|
|POSITION IN THE ORGANIZATION CHART|
|Hierarchical relationship: SPS Structures & Hardware Lead|
Present Holder: TBA
|DIMENSIONS OF THE SERVICE|
|PREOWEI field is located approximately 175 km from Port Harcourt, within the Oil Mining Lease 130, in water|
depths ranging from 1100-1500m. Distances with the main existing or future infrastructures are:
29 km to the North of EGINA Field and EGINA FPSO (OML130, operated by TUPNI)
20 km to the North-West of AKPO field & AKPO FPSO (OML130, operated by TUPNI)
PREOWEI will be developed as a subsea Tie-back to the EGINA FPSO. The management of the PREOWEI Project will be from Lagos, Nigeria
| Review Design Proposals from the Alliances (Design proposals include Basis of Design, Flow Diagrams, Specifications, Procedures, Calculation Notes, & MTOs).|
Ensure that Design proposals from the Alliances meet the requirements and expectations of the various
Exhibits in the FEED Contract.
Review documents issued by the Alliances for the Scope of Work relevant to the Subsea Jumpers & Connection Systems.
Participate in Design Reviews, and Technical Workshops and any other Meetings as may be assigned by the
Lead Engineer in the Scope of Work relevant to the Subsea Jumpers & Connection Systems.
Ensure that Interface issues from other Packages relevant to the Jumpers & Connection Systems are resolved in a timely manner.
Liaise with Company Specialists within the various Technical departments in HQ to ensure Design proposals from the Alliances meet the requirements of the Company specifications.
Review and Action as required Deviation/Derogation Requests, and Technical Queries that may originate from the Alliances.
Assist the Lead Engineer to identify and manage risks associated with the FEED activities within the Package.
Provide on a regular basis, a status Report of activities to the Lead Engineer.
Contribute to the Lessons Learned to be developed
Contribute to preparing the Close-out Report relevant to the Subsea Jumpers & Connection Systems.
To fully comply with office security, health and safety instructions.
To stay vigilant and maintain continuous awareness of hazards and surroundings.
To report to Management on any issue they may face or observe and propose way of improvement.
To also take care of colleagues safety and behaviour without hesitating to intervene as much as necessary.
Page 1 of 2
|SERVICE DESCRIPTION – Subsea Flowlines Jumpers Connectors Systems Engineer|
| To give his own input and making sure the workplace is safe (obviously clean and tidy).|
To participate in relevant HSE meetings such as HSE Committee, JSA, etc.
To fully comply with Security rules about Travelling in Nigeria.
|CONTEXT AND ENVIRONEMENT|
The PREOWEI Project is a challenging Project Technically, and with the added constraint of a short time-line for its execution. There is also the constraint of having to interface with multiple (at least three) Alliances within this short time-line (six months)
Position is located in Lagos, with visits to the various Contractors’ offices within and outside Lagos.
The Service holder shall assist the Lead Engineer to ensure that the Alliances produce fully fit-for-purpose Functional Design documents and that the ENGINEERING DELIVERABLE Dossier submitted by them contain sufficient information to enable them submit a Technical and Commercial offer (PROPOSAL) for the ensuing EPCI CONTRACT.
Accountable for Subsea Flowlines Jumpers & Connection Systems technical coordination with Alliances
Ensures timely return of all Alliance issued engineering documents within his responsibility.
| Education: First degree in relevant Engineering Discipline. Master degree or an equivalent is an advantage|
Qualification: 6+ years’ experience in the Engineering of Subsea Jumpers (rigid and Flexible), and Connection
To have experience in the application of industry standards and codes related to subsea hardware and systems such as API 6A & 17D, ASME B31.3, ASME B31.8, API RP-17P, API RP-17R, API RP-2A, DNV-RP-F119, as well as other ISO, DNV and NORSOK equivalent standards.
Must have knowledge of the Connection Systems (Hubs and Connectors) engineering and manufacturing processes of the major Subsea Hardware Suppliers
Experience in the Engineering of Thermo Plastic Pipes (TCP) will be an added advantage
Previous experience of Company / Operator Representation during similar type project execution is a distinct advantage
Mobility: placement is primarily in Lagos, Nigeria with the potential for international trips. Language: Fluency in English language.